Aerospace Maintenance and Assembly

Photos of aircraft maintenance and assembly processes, featuring mechanics and machinery in hangars, highlighting technical operations.

KENNEDY SPACE CENTER, FLA. -- The belly of Atlantis can be seen as the orbiter, suspended vertically above the transfer aisle of the Vehicle Assembly Building, is slowly lifted up into the upper regions for transfer to high bay 1. The orbiter will then be lowered onto the mobile launcher platform where the external tank and solid rocket boosters are already stacked. Space Shuttle Atlantis is targeted to roll out to Launch Pad 39A on February 14 for mission STS-117. The mission is No. 21 to the International Space Station and construction flight 13A.

Maintenance at the left motor of a Fokker F.27-300M Troopship in UN execution of the Royal Netherlands Air Force at Soesterberg airbase.

Mechanics engaged in maintenance of a right motor of a Fokker F.27-300M Troopship in UN implementation of the Royal Netherlands Air Force at Soesterberg Air Base.

KENNEDY SPACE CENTER, FLA. - In preparation for lifting Atlantis into high bay 3 of the Vehicle Assembly Building, workers are installing a large crane around it to raise it off the transporter into a vertical position. After Atlantis is lifted and moved into the high bay, the orbiter will be lowered and mated with the external tank and solid rocket boosters already stacked on the mobile launcher platform. Atlantis' launch window begins Aug. 28. During its 11-day mission to the International Space Station, the STS-115 crew of six astronauts will install the Port 3/4 truss segment with its two large solar arrays.

A770556 PNE LOADING EQUIPMENT C-130 J.R. DICKINSON (Project Engineer) FEB 3 77 EG&G/NTS PHOTO LAB Publication Date: 2/3/1977 AIRCRAFT; AIRPLANES (INCLUDING COPTERS); C-130; C-130 HERCULES CARGO TRANSPORT; CARGO PLANES; DICKINSON, J.R.; EDGERTON, GERMESHAUSEN & GRIER; EG&G; EQUIPMENT (SNL); LOADING; NEVADA; NEVADA TEST SITE; NTS; NUCLEAR ENERGY TECHNOLOGY; NUCLEAR TESTING; PEACEFUL NUCLEAR EXPLOSIONS; PLANES (INCLUDES HELICOPTERS); PNE; PNE LOADING EQUIPMENT C-130; TAIL ASSEMBLY (AIRPLANE); TEST SITES; TIRES; TRANSPORTS (MILITARY PLANES); UGT; UNDERGROUND TESTING; PNE-LOADING EQUIPMENT C-130 historical images. 1972 - 2012. Department of Energy. National Nuclear Security Administration. Photographs Related to Nuclear Weapons Testing at the Nevada Test Site.

High angle view of a passenger craft in an airplane factory, Shanghai, China

U.S. Air Force maintainers from 86th Maintenance Squadron inspect the engines of a C-130J Super Hercules aircraft at Ramstein Air Base, Germany, Jan. 9, 2024. The inspection consisted of bringing the aircraft into the hangar to get a more in depth look for anything that needed fixing or replacement that could not be seen out on the flightline. The aircraft gets sectioned into 10 zones for the avionics, crew chief and engine crews to be able to inspect their areas of expertise.

KENNEDY SPACE CENTER, FLA. -- The belly of Atlantis can be seen as the orbiter, suspended vertically above the transfer aisle of the Vehicle Assembly Building, is slowly lifted up into the upper regions for transfer to high bay 1. The orbiter will then be lowered onto the mobile launcher platform where the external tank and solid rocket boosters are already stacked. Space Shuttle Atlantis is targeted to roll out to Launch Pad 39A on February 14 for mission STS-117. The mission is No. 21 to the International Space Station and construction flight 13A.

KENNEDY SPACE CENTER, FLA. -- Workers check the crane that will begin raising Space Shuttle Atlantis to a vertical position in the Vehicle Assembly Building. Once in position, it will be mated with its external tank and solid rocket boosters before being transported to Launch Pad 39A. Atlantis will fly on mission STS-101 to the International Space Station, where its crew of seven will prepare the Station for the arrival of the next pressurized module, the Russian-built Zvezda. Atlantis is expected to launch no earlier than April 17, 2000

Left side view of an F-16 Fighting Falcon aircraft undergoing climatic testing at the Armament Development and Test Center McKinley Laboratory. Base: Eglin Air Force Base State: Florida (FL) Country: United States Of America (USA)

CAPE CANAVERAL, Fla. -- In the Vehicle Assembly Building transfer aisle at NASA's Kennedy Space Center in Florida, space shuttle Discovery is lifted from its transporter by an overhead crane. The shuttle will be raised to a vertical position and lifted into high bay 3 where it will be mated with its external fuel tank and solid rocket boosters on the mobile launcher platform. After additional preparations are made, the shuttle will be rolled out to Launch Pad 39A for a targeted launch on Feb. 12. Discovery will carry the final starboard truss (S6) in the assembly of the International Space Station.

Structural loads testing on the Active Aeroelastic Wing F-18 in the Flight Loads Laboratory at NASA's Dryden flight Research Center, Edwards, California

Maintenance is performed on a KC-135 Stratotanker aircraft engine. Base: K. I. Sawyer Air Force Base State: Michigan (MI) Country: United States Of America (USA)

KENNEDY SPACE CENTER, FLA. -- The orbiter Atlantis rolls out of the Orbiter Processing Facility at Kennedy Space Center (KSC) for its journey to the Shuttle Landing Facility where it will be lifted and mated to the Shuttle Carrier Aircraft at KSCs Shuttle Landing Facility. Atlantis will then be ferried to California for its Orbiter Maintenance Down Period at Palmdales Orbiter Assembly Facility, where it will remain until August 1998. At Palmdale, modifications and structural inspections will be conducted in preparation for Atlantis future missions to support International Space Station assembly activities. Atlantis next flight into space is scheduled to be Space Shuttle mission STS-92, targeted for launch from KSC in January 1999

DF-ST-87-00868. Country: Unknown

F-16s in Maintenance Hangar

. NASA 862, which is an F/A-18D based at NASAs Armstrong Flight Research Center in Edwards, California, has paint applied at the U.S. Air Force Corrosion Control Facility. The facility is located on Edwards Air Force Base and is also known as the Paint Barn.

License construction of the General Dynamics F-16 at the Breeder Factories Schiphol.

The upper wing surfaces of the Active Aeroelastic Wing F/A-18 test aircraft are covered with accelerometers and other sensors during ground vibration tests at the Dryden Flight Research Center. An electro-mechanical shaker device (blue cylinder at lower right) generates vibrations into the airframe during the tests, which help engineers determine if aerodynamically induced vibrations are controlled or suppressed during flight.

RAIF Hangar Bays 1 and 2. Three of NASA's F-18 aircraft can be seen in this photo. The SRA, or Systems Research Aircraft, is at the far left. In the middle is the F-18 Iron Bird, used for full-scale, hardware-in-the-loop simulations. On the right is the F-18 High Alpha Research Vehicle, or HARV.

LINEA DE MONTAJE DE AVIONES C-212. Location: CONSTRUCCIONES AERONAUTICAS-CASA. GETAFE. MADRID. SPANIEN.

License construction of the General Dynamics F-16 at the Breeder Factories Schiphol.

Low-angle Stern on view showing a shipyard worker aboard an extendable arm platform touching up the anti-fouling paint on the hull of the US Navy (USN) ARLEIGH BURKE CLASS (FLIGHT IIA) GUIDED MISSILE DESTROYER (AEGIS), USS PINCKNEY (DDG 91), as the ship rest aboard a floating dry dock at Ingalls Shipyard, Pascagoula, Mississippi (MS). The ships two shaft driven propellers and rudders a clearly visible. Base: Ingalls Shipbuilding, Pascagoula State: Mississippi (MS) Country: United States Of America (USA)

Royal Air Force 1939-1945- Bomber Command The tail surfaces being fitted to Halifax II Series I W7656 at Handley Page's plant at Cricklewood, London, March 1942.

Clamshell grabbing scrap in a scrap metal recycling plant

CAPE CANAVERAL, Fla. -- In the transfer aisle of the Vehicle Assembly Building at NASA's Kennedy Space Center in Florida, workers attach an overhead crane to space shuttle Endeavour. The crane will lift the spacecraft into a high bay where it will be attached to its external fuel tank and solid rocket boosters for its final mission, STS-134.Endeavour and its STS-134 crew will deliver the Express Logistics Carrier-3, Alpha Magnetic Spectrometer, a high-pressure gas tank, additional spare parts for Dextre and micrometeoroid debris shields to the International Space Station. Launch is targeted for April 19 at 7:48 p.m. EDT.

Culver City, California: c. 1946 The 220 foot long hull of Howard Hughes' flying boat under construction in its hangar. It is near completion with its final coat of aluminum lacquer. The cut away section is where the wings will fit together.

Boeing Subsonic Ultra Green Aircraft Research (SUGAR) Subsonic Fixed Wing in the (TDT) 16 Foot Transonic Dynamics Tunnel facility 648

Maintenance at the left motor of a Breeder F.27-300M Troopship of the KLU on the Soesterberg airbase.

Aircraft Mechanic Tony Wilson working on one of Everts Air Fuel's DC-6 Pratt and Whitney R-2800 CB16 Engines, Everts Air Fuel Hangar, Fairbanks, Alaska.

REVISION DE REACTOR EN UN HANGAR.

CAPE CANAVERAL, Fla. -- Technicians in the Vehicle Assembly Building at NASAs Kennedy Space Center in Florida, are jacking crawler-transporter 2, or CT-2, four feet off the floor to facilitate removal of the roller bearing assemblies. After inspections, new assemblies will be installed.The Ground Systems Development and Operations Program office at Kennedy is overseeing the upgrades to CT-2 so that it can carry NASAs Space Launch System heavy-lift rocket and new Orion spacecraft to the launch pad. For more than 45 years the crawler-transporters were used to transport the mobile launcher platform and the Apollo-Saturn V rockets and, later, space shuttles to Launch Pads 39A and B.

A900375 U12N RANDSBURG RED SHACK RAY PEABODY (Project Engineer) MAY 23 90 EG&G/NTS PHOTO LAB Publication Date: 5/23/1990 CABLES; CABLES & WIRES; EDGERTON, GERMESHAUSEN & GRIER; EG&G; EQUIPMENT; EQUIPMENT & INSTRUMENTS; INSTRUMENTS & EQUIPMENT; INSTRUMENTS AND EQUIPMENT; N-TUNNEL; NEVADA; NEVADA TEST SITE; NTS; NUCLEAR ENERGY TECHNOLOGY; RACKS; RANDSBURG; RED SHACK; TEST SITES; TUNNELS; UGT; UNDERGROUND TESTING; WEAPONS RELATED; WIRE & CABLES historical images. 1972 - 2012. Department of Energy. National Nuclear Security Administration. Photographs Related to Nuclear Weapons Testing at the Nevada Test Site.

The escape tower is slowly moved into position so it may be attached to the Soyuz TMA-14 spacecraft and boosters Monday, March 23, 2009 at the Baikonur Cosmodrome in Kazakhstan. The Soyuz is scheduled to launch the crew of Expedition 19 and a spaceflight participant on March 26, 2009.

License construction of the General Dynamics F-16 at the Breeder Factories Schiphol.

A Coast Guard Air Station Kodiak aircrew completes maintenance on an MH-60 Jayhawk helicopter in Kodiak, Alaska, on Sept. 7, 2022. Aircrews accrue countless hours conducting routine maintenance on Coast Guard aircraft to ensure full mission readiness and capabilities. U.S. Coast Guard photo by Petty Officer 3rd Class Ian Gray.

Crew members work on aircraft in the hangar bay of the nuclear-powered aircraft carrier USS DWIGHT D. EISENHOWER (CVN-69). Country: Mediterranean Sea (MED)

Airplane mechanic working on a vintage aircraft.

The modified X-34, known as A-1A, rests in the background of the Dryden Flight Research Center at Edwards Air Force Base, Calif., while an integrated team of KSC, Dryden Flight Research Center and Orbital Sciences Corporation engineers and technicians bring the X-34 A-1A vehicle closer to test flight readiness. Since September, eight NASA engineering technicians from KSC's Engineering Prototype Lab have assisted in the complex process of converting the X-34 A-1 vehicle from captive carry status to unpowered flight status, the A-1A. The X-34 is 58.3 feet long, 27.7 feet wide from wing tip to wing tip, and 11.5 feet tall from the bottom of the fuselage to the top of the tail. The autonomously operated technology demonstrator will be air-launched from an L-1011 airplane and should be capable of flying eight times the speed of sound, reaching an altitude of 250,000 feet. The X-34 Project is managed by NASA's Marshall Space Flight Center in Huntsville, Ala

A left front view of an OA-37 Dragonfly aircraft parked in the corrosion control hangar after being painted in corrosion-resistant gray. Base: Osan Air Base Country: Republic Of Korea (KOR)

The M-Frat Hr.Ms. Abraham van der Hulst (1993-2004) in the covered dock of the Rijkswerf in Den Helder in 2000

This view from above shows the vertical tail loads testing on a Navy F/A-18E that concluded in May, wrapping up the third phase of research at NASAs Armstrong Flight Research Center in Edwards, California. The first two phases included loads calibration testing focused on the aircrafts horizontal tails and wings. The aircraft is from the Naval Air Systems Command (NAVAIR) in Patuxent River, Maryland. NAVAIR retired its previous loads test aircraft and NASA Armstrong staff are assisting to prepare the new aircraft for its role to help safely manage flight maneuvers and determine how the F/A-18E fleet will perform if proposed upgrades are incorporated.

A port view of construction progress aboard the mine countermeasures vessel DEVASTATOR (MCM-6). Base: Sturgeon Bay State: Wisconsin (WI) Country: United States Of America (USA)

KENNEDY SPACE CENTER, FLA. -- In the Space Station Processing Facility at NASA's Kennedy Space Center, an overhead crane places the Experiment Logistics Module Pressurized Section, or ELM-PS, of the Japanese Experiment Module, called Kibo, into position in a payload canister for eventual transfer to Launch Pad 39A. The ELM-PS is the primary payload for space shuttle Endeavour's STS-123 mission, which is targeted for launch to the International Space Station on March 11.

A view of the 01 level of the mine countermeasures ship DEVASTATOR (MCM-6) while the ship is under construction at the Peterson Builders, Inc. shipyard. Base: Sturgeon Bay State: Wisconsin (WI) Country: United States Of America (USA)

This rear view of the left wing load hardware shows the setup for testing a F/A-18E from the Naval Air Systems Command (NAVAIR) in Patuxent River, Maryland. The aircraft is in NASAs Armstrong Flight Research Center Flight Loads Laboratory in Edwards, California, for the centers biggest load calibrations tests. This testing is needed before the aircraft can serve as a test vehicle for determining if it can safely manage maneuvers and proposed upgrades.

pendennis shipyard shipyard views-dry dock

CAPE CANAVERAL, Fla. -- In the Vehicle Assembly Building transfer aisle at NASA's Kennedy Space Center in Florida, space shuttle Discovery is viewed from underneath as it is lifted from its transporter by an overhead crane. The shuttle will be raised to a vertical position and lifted into high bay 3 where it will be mated with its external fuel tank and solid rocket boosters on the mobile launcher platform. After additional preparations are made, the shuttle will be rolled out to Launch Pad 39A for a targeted launch on Feb. 12. Discovery will carry the final starboard truss (S6) in the assembly of the International Space Station.

The Soyuz rocket and Soyuz TMA-14M spacecraft is assembled at Building 112 at the Baikonur Cosmodrome on Monday, Sept. 22, 2014, in Baikonur, Kazakhstan. Launch of the Soyuz is scheduled for Sept. 26 and will send Expedition 41 Soyuz Commander Alexander Samokutyaev of the Russian Federal Space Agency (Roscosmos), Flight Engineer Barry Wilmore of NASA, and Flight Engineer Elena Serova of Roscosmos to the International Space Station for a five and a half month stay.

Assembly worker at the Beechcraft factory in Wichita, Kansas.

U.S. Air Force Airman 1st Class Zachery Brackeen, a 28th Aircraft Maintenance Squadron crew chief, services the Cn2 hydraulic system on a U.S. Air Force B-1B Lancer aircraft engine at Ellsworth Air Force Base, S.D., Jan. 21, 2011. The Cn2 system runs all of the hydraulics on the aircraft and is maintained and refilled as needed to ensure the proper flow of fluids.

KENNEDY SPACE CENTER, FLA. -- Workers in the Vehicle Assembly Building maneuver equipment in place to remove Main Engine No. 1 from Space Shuttle Atlantis in the Vehicle Assembly Building. An inventory review concerning defective main engine fuel pump tip seals indicated that defective seals may be present on the fuel pump for the engine. The decision was made to replace the suspect engine with one originally slated for Discovery. The main engine nozzles, visible in the photo, are 7.8 feet across and 9.4 feet high. Space Shuttle Atlantis is scheduled to launch no earlier than April 17, 2000, on mission STS-101 to resupply the International Space Station for the arrival of the next pressurized module, the Russian-built Zvezda

A test version of Orion awaits the next round of recovery tests inside of the USS Anchorage's well deck as the ship travels off the coast of California on Sept. 15, 2014. The well deck can be flooded with water to allow Orion to float in following its splashdown when it returns from space. Part of Batch image transfer from Flickr.

A floor of metal pallets is laid by ground crewmen in preparation for the loading of equipment through the side rear door of a 747 cargo aircraft during Operation Ocean Venture '82. Subject Operation/Series: OCEAN VENTURE '82 Base: Fort Campbell State: Kentucky (KY) Country: United States Of America (USA)

Depot aircraft equipment (DVM). Maintenance and overhaul to Bölkow BO-105C helicopters.

CAPE CANAVERAL, Fla. -- Technicians in the Vehicle Assembly Building at NASAs Kennedy Space Center in Florida, prepare crawler-transporter 2, or CT-2, for removal of the roller bearing assemblies. After inspections, new assemblies will be installed. The Ground Systems Development and Operations Program office at Kennedy is overseeing the upgrades to CT-2 so that it can carry NASAs Space Launch System heavy-lift rocket and new Orion spacecraft to the launch pad. For more than 45 years the crawler-transporters were used to transport the mobile launcher platform and the Apollo-Saturn V rockets and, later, space shuttles to Launch Pads 39A and B.

DF-ST-85-04160. Subject Operation/Series: VOLANT OAK Base: Kulis Air National Guard Base State: Alaska (AK) Country: United States Of America (USA)

The Breguet BR1150 Atlantic (SP-13A) maritime patrol range 258 (1972-1984) during maintenance in a hangar at Marineliegkamp Valkenburg.

A technician at the Baikonur Cosmodrome walks with the Soyuz capsule as it is prepared to mate with its booster rocket in preparation for the April 19 launch of the Expedition 9 crew and a European astronaut to the International Space Station, Friday, April 16, 2008, in Baikonur, Kazakhstan.

The jet engine output of a MIG. The jet engine output of a MIG.

An F-4 Phantom II aircraft is removed from a 30-foot-high test pedestal prior to being turned over and remounted. From this test pedestal, at the Rome Air Development Center, aircraft antennas can be tested and evaluated in various flight positions. Base: Griffiss Air Force Base State: New York (NY) Country: United States Of America (USA)

License construction of the General Dynamics F-16 at the Breeder Factories Schiphol.

Caucasian man working in airplane hangar

DN-ST-89-03581. Country: Unknown

Interior View of Hangar AF Complex

Helicopter active flow control tests in the 14X22 subsonic wind tunnel. Photos include preparation of the model before testing and the control room where testing is monitored and data collected

License construction of the General Dynamics F-16 at the Breeder Factories Schiphol.

3% Space Shuttle Model preparation in Ames Machine Shop for Return to flight test to be run in the Ames 9X7ft wind tunnel test T97-0131 (IA-700B)

A Space Shuttle engine is shown being test fired at the Sternis, MS facility. MSFC was the managing facility for the Space Shuttle program.

Oil Sands Northern Alberta Canada

Construction phase of a Westland SH-14D Navy Lynx helicopter (1980-).

KENNEDY SPACE CENTER, FLA. -- In the Vehicle Assembly Building at NASA's Kennedy Space Center, the external tank is lowered between the solid rocket boosters on the mobile launcher platform below. After mating, the boosters-tank configuration will be used on space shuttle Atlantis for mission STS-122, which is targeted for launch on Dec. 6.

An elevated right front view of a B-1B aircraft in final stages of construction. Country: Unknown

A test version of the Orion crew module is secured in the well deck of the USS San Diego for Underway Recovery Test 5 on Oct. 26, 2016. NASA's Ground Systems Development and Operations Program and the U.S. Navy will conduct a series of tests using the ship's well deck, the test module, various watercraft and equipment to prepare for recovery of Orion on its return from deep space missions. The test will allow the team to demonstrate and evaluate recovery processes, procedures, hardware and personnel in open waters. Part of Batch images transfer from Flickr.

The Mine hunter Alkmaar (1983-2000) during construction at Van der Giessen De Noord in Alblasserdam.

F-16s in Maintenance Hangar

CAPE CANAVERAL, Fla. -- Workers begin to unload the first elements for NASA's Mars Science Laboratory (MSL) payload after arrival at NASA Kennedy Space Center's Shuttle Landing Facility aboard an Air Force C-17 cargo plane. The cruise stage, back shell and heat shield, the first flight elements to arrive for the MSL mission, were taken to the Payload Hazardous Servicing Facility (PHSF) located in the KSC Industrial Area to begin processing. The Curiosity rover will arrive next month. A United Launch Alliance Atlas V-541 configuration will be used to loft MSL into space. Curiositys 10 science instruments are designed to search for evidence on whether Mars has had environments favorable to microbial life, including chemical ingredients for life. The unique rover will use a laser to look inside rocks and release its gasses so that the rovers spectrometer can analyze and send the data back to Earth. MSL is scheduled to launch from Cape Canaveral Air Force Station in Florida Nov. 25

submarine engine room submarine inside engine room camera in motion Copyright: xZoonar.com/mrivsergx 11912579

Airmen with the 166th Airlift Wing, 166th Maintenence Squadron, jet propulsion section, tighten a mounting bolt on a new engine at the Delaware Air National Guard Base, New Castle, Del, May 14, 2022. The original engine was removed from the aircraft as part of routine maintenance operations. Four bolts connect the engine to the wing, ensuring that the torque is correct is a critical part of the installation process.

KENNEDY SPACE CENTER, FLA. -- Workers put the finishing touches on new paint for the blades of a NASA UH-1H helicopter. They have changed the black to a pattern of white and yellow stripes. The pattern provides better visibility in smoke and fire conditions. When the rotors are turning, the stripes create a yellow and white circle that is more easily seen from above by a second helicopter. The helicopters, primarily used for security and medical evacuation for NASA, will be used to deliver water via buckets during brush fires. The change was made to comply with U.S. Fish and Wildlife and Department of Forestry regulations for helicopter-assisted fire control

An F-15C Eagle aircraft stands in a hangar while undergoing repainting. The plane will be sold to Saudi Arabia. Base: Soesterberg Air Base Country: Netherlands / Holland (NLD)

Gas kettle in a heating power plant The coal-fired power plant supplies many households and companies with district heating by giving power and power and produces electricity for the base load. Overall, it has an electrical output of 273 megawatts and a thermal output of 680 megawatts. Block 4 was built in 1994 and uses natural gas as a fuel. It has a net output of 99 MW and is designed for the power tip loads. , Property Released

North American B-25 bomber is prepared for painting on the outside assembly line, Inglewood, California.

Coast Guard Structures - Air Stations - New Orleans - 26-HK-95-289. AIRSTA NOLA--HH-65 in hangar. Hurricane Katrina

Nike-crew at work.

An SH-3C Sea King helicopter of Helicopter Anti-Submarine Squadron Five (HS-5) is being prepared for a corrosion inspection inside a hangar. Base: Naval Air Station, Jacksonville State: Florida (FL) Country: United States Of America (USA)

Getting Nose Door ready to be put on C-87 Transport Plane at End of Assembly Line, Consolidated Aircraft Corporation, Fort Worth, Texas, USA, photograph by Howard R. Hollem, U.S. Office of War Information, October 1942

A coastal mine sweep from the Dokkum class (1955-1996) on the ships lift.

KENNEDY SPACE CENTER, FLA. -- Workers in the Orbiter Processing Facility bay 2 keep watch as an overhead crane lowers the Multi-Purpose Logistics Module Leonardo and the integrated cargo carrier behind it into a payload canister. The MPLM has just returned from its first round trip to the International Space Station on mission STS-102. The MPLM will be transferred to the SSPF to prepare it for future missions

Northwest Machining and Manufacturing tour the 124th Fighter Wings aircraft maintenance hanger, Gowen Field, ID, April 6, 2023. This Meridian, Idaho-based machining company has been manufacturing a critical landing gear component for the A-10 Thunderbolt IIs at Gowen Field for decades.

F-16 assembly in the breeding factory at Schiphol.

SNCASE Aircraft Factory (Armagnac). Photographs of Marshall Plan Programs, Exhibits, and Personnel

Construction of the S-Fregat Kortenaer (1978-1997) at the Kon. Me. The Scheldt (KMS) in Vlissingen

Aircrafts - HH-65 Dolphin - 26-HK-54-53. HH-65s and personnel in hangar. Hurricane Katrina

Depot aircraft equipment (DVM). In the context of an anti-corrosion treatment project, the paint layer of a Northrop NF-5a was removed before it was provided with a new paint layer.

A plant employee steadies a propulsion stage from a Pershing 1A missile as it is lowered into place on a firing stand. Several missiles are being destroyed in the presence of Soviet inspectors in accordance with the Intermediate-Range Nuclear Forces (INF) Treaty. Base: Longhorn Army Ammunition Plant State: Texas (TX) Country: United States Of America (USA)

Aviation Machinist Second Class (AD2) Robert Brackhahn is shown installing safety wiring bolts on a oil turbine line at the Aircraft Intermediate Maintenance Department (AMID) at Naval Air Facility Unit 5048. Base: Naval Air Facility, Misawa State: Aomori Country: Japan (JPN)

Aviation Training Center - 26-HK-290-17. Hurricane Katrina

The production of a Contract Maintenance Truck (CMT) which consists of a specially configured shelter mounted on a heavy High-Mobility Multipurpose Wheeled Vehicle (HMMWV) chassis. Country: Unknown

Seabees a dump truck and a soil compactor to prepare the foundation for a new building outside a hangar of Fleet Air Reconnaissance Squadron 2 (VQ-2). Exact Date Shot Unknown. Base: Naval Station, Rota Country: Spain (ESP)

of 2