Historical Equipment Models

Detailed images of vintage equipment such as cameras and presses, showcasing historical craftsmanship and design for educational purposes.

Vintage Photograph. Cast iron book press with gradient light on background

Hand press for pressing dry seals

Model or A 24-pounder Breech-Loading Gun. Model of a back charging gun of 24 pounds on ship's part, incomplete. The loop is 30.5 cm long and has a 14 mm caliber. The grape has been replaced by a brass bracket, probably for handling the final piece. A wedge right through the kulas holds the locking piece in place; The final piece consists of the bracket and the bottom of the room, which is pulled back from the kulas. Only a cheek has been preserved from the affit. The ship's part is a schematic representation of a piece of deck and a gun port with a round opening, the outer diameter of which is larger than the inner diameter. Scale 1:10 (estimation).

Normal 35 mm movie camera produced by Ernemann-Werke AG in 1918, constructed primarily from wood, intended for motion picture filming.

Zoar Lock w/ Key. Dated: c. 1938. Dimensions: overall: 63 x 43.6 cm (24 13/16 x 17 3/16 in.) Original IAD Object: 7 1/2" wide; 5 1/2" high. Medium: watercolor, graphite, and pen and ink on paperboard. Museum: National Gallery of Art, Washington DC. Author: Angelo Bulone.

The Courier III detective camera by Theodor Harbers is a 9 x 12 cm wooden camera with a Xenar lens by Jos. Schneider & Co., iris diaphragms, and compur sector closure, produced around 1890.

Model of a Disengaging Gear for Paddle Wheels. Model of the crankshaft decoupling of a scoop wheel, on a base board. The pin of the stool falls into a slot of a cup to the stool of the Rader-axis, which, when rotated in the correct position, releases the pin and thereby disconnects the shaft. With every stroke, the pin of the stool then moves freely through the slot. Both axes can be moved with a crank. Scale 1:10 (derived).

Gunlock (Flintlock) With a Double Flint. Right cannon lock (flint slot) with brass house and iron lock mechanism, tractor, rooster, pandeschel and tail bolt with wing nut. The rooster has two set lips, which can rotate to a bolt with a wing nut: it is equipped for two flints, in case one became unusable. The slot is mounted with the tail bolt by the highest piece of jewelry. Pan and Pandekel have been extended. The tractor has a retraction rope.

Vending Machine, Gumball Machine 1930-1950 goods machine or chewing gum machine from the 30s to 1950s. These machines used to be on the counter of Aunt Emma shops and also restaurants.

Vintage Photograph. Cast iron book press with gradient light on background

Schot, part of a paneling from the house of Dentz van Schaick, Carel Adolph Lion Cachet, c. 1900 - c. 1905 Scot, consisting of six panels. Part of a paneling from the house of Dentz van Schaick on Frederiksplein in Amsterdam 50-52. Marked: AB6 D2. Plinth. Amsterdam rosewood (wood). paint (coating). spruce (wood) Scot, consisting of six panels. Part of a paneling from the house of Dentz van Schaick on Frederiksplein in Amsterdam 50-52. Marked: AB6 D2. Plinth. Amsterdam rosewood (wood). paint (coating). spruce (wood)

Model of a 12-pounder carronade on deck, Rijkswerf Vlissingen, 1839 gunmodel. demonstration model Model of a carronade of 12 pounds in battery, with all accessories. The wooden loop, 16.6 cm for a long time and with a caliber of 23 mm, is painted black and has a visor on the tap band, a brush ring and an eleve screw through the grape with rain cap. The upper slide has a light trape-shaped body with brass batter and rings, the front and back are completed. Against the back the baking tub in brass batter with baking sucker and on top of the track in front of the Eleveers screw, at the front the ears with tapas and the vertebout walking in the slot of the destroying. The submerged is a wooden window, rounded at the front, partially fitted with brass and equipped with two bolts. At the back the deducted and a little has been completed. In the middle and rear the window is supported by bobbins with wheels: the wheels in the middle walk in the longitudinal direction; The wheels behind are ra

Half Model of a 20-Gun Sloop of War.Polychromed mold model (starboard) of a three-master. Closed the skin above the bark wood. Ten gunposes indicated on one deck, which is closed. Wrecked mirror, closed hollow wulf, no details of the fence, no side gallery; Stir straight with square roofing. Sea in front and behind something ascending, one bark wood. Peaked round trip.

United Kingdom, 20th century - Bakelite camera, 1920's.

Mortier on wooden frame, anonymous, c. 1600 - c. 1699 cannon. mortar Mortier of iron with two handles, standing on wooden base with adjusting screw. Netherlands iron (metal). elm (wood)

TELEFONO FERROVIARIO antiguo, año 1845. Deutsches Technikmuseum. Berlin. Alemania.

Ancient, antique telephone hanging on a room wall, historic, history, communication

Model of An installation for tarring rope yarn. Model of a device for tearing cable yarns on base plank. The operation of the model remains unclear. On one side a tear reservoir is suggested with two holes, so a rope can run. There is a framework with Raderwerk on the other half: it looks like a press, but this remains insecure. Two heavy wheels turn on each other: the flat surface of the upper turns into the slot of the lower. A set of cheeks that follows the circumference of the lower wheel is on top of this and conducts the top wheel. The movement of both wheels is synchronized by a set of double gears next to the wheels. The upper wheel with gears is mounted in a frame that can be moved up and down using a lever with weight on a side, probably to control the pressure. The lower wheel is driven by a crank, which is missing, and has a sprocket at the side of the frame that, probably with a PAL that is now missing, prevented.

Wash Stand (England); wood

500 selector.

Majskvarn.

Jessie M Youngs, Coffee Roaster, c 1940 Coffee Roaster

Latch Lock, Key, and Catch 1730-70 American. Latch Lock, Key, and Catch. American. 1730-70. Wrought iron. Made in Pennsylvania, United States

Model of a Disengaging Gear for Paddle Wheels. Model of the crankshaft decoupling of a scoop wheel, on a base board. The pin of the stool falls into a slot of a cup to the stool of the Rader-axis, which, when rotated in the correct position, releases the pin and thereby disconnects the shaft. With every stroke, the pin of the stool then moves freely through the slot. Both axes can be moved with a crank. Scale 1: 5 (derived).

Half Model of a 44-Gun Frigate.Polychromed mold model (starboard) of a three-master. No gunpaints or decks indicated, only the semi-deck and baking deck through gillings. Lice hire indicated by a hollowed block. Wrinkled mirror, the hollow wulf very sloping; No details of fence, side gallery or stir. Scroll a little ascending, one mountain wood and one Reehout at both ends. Something peaked around.

Old sewing machine workshop

Half Model of a 68-Gun Ship of the Line, anonymous, c. 1750 - c. 1810 ship model. half model. builder's model Polychromed mold model (starboard) of a three -mast. Thirty gun gates spread over three decks; No baking deck indicated. Willed mirror, Hol Wulf, no fence or side gallery; Straight with square stirring king. Fairly flat siege, two mountain wood and one reehout. Round underwater ship. Scale 1:60 (derived). Netherlands wood (plant material)

Bar Lock and Keys. Dated: 1940. Dimensions: overall: 28.2 x 35.8 cm (11 1/8 x 14 1/8 in.) Original IAD Object: 6" high; 8" wide; 1 1/4" thick. Medium: watercolor, graphite, and colored pencil on paperboard. Museum: National Gallery of Art, Washington DC. Author: Alexander Anderson.

Old navigational instruments. Sextant. 19th-20 th centuries. Museum of History and Navigation. Riga. Latvia.

Spanish Civil War (1936-1939). Telegraph used in Oviedo, c. 1937. Wood, metal and bakelite. Army Museum. Toledo, Spain.

Sanderson Tropical half-plate wood camera

Model of An installation for tarring rope yarn. Model of a device for tearing cable yarns. The functioning of the model remains unclear. In the middle, a tar reservoir has been lowered in the floor. Two transverse slurters hold a set of metal plates upright straight: one of them has a slot, the opening of which is controlled by leaving the other. On each side of the tar reservoir is a frame with two coils each; At the top of one frame also two tubular conductors for the yarns. On both ends there is a large framework, connected by a crossbar. On the one hand, two coils with yarns and a crank are applied to the other three empty flushes on one side, one with a drum and crank. On one side a tripod stool with a pin or vertical axis is on top.

Rollfilm Box Tennoor 54/2 camera, 6 x 9 cm, made of metal, produced by Zeiss Ikon AG after 1931 for medium format photography.

Model or a windlass. Model of a roasting pill on a floor plank. The drum, suspended between two cheeks, has no holes for wind trees: the roasting spindle is operated with a single wind tree on the steering bord cheek, which grabs with a pitch in a gear. In the middle is a stove with two wooden palls, grabbing in the gear portion of the drum to prevent the fallback. An extra gear wheel is applied to the port charm. Scale 1:10 (estimation).

Durometer. >>

1960s WOODEN AND BRASS METRONOME

. Brush of silver in the shape of a scissors with a container at the end.

. Brill's glasses of brown leather, lined with green paper, for accompanying play scope ().

Model of a Ventilator, anonymous, 1746 - 1800 demonstration model Model of a fan working as a double bladder ball. Part of the cover can be removed to show the inside. In the body, which has the shape of a circles segment at its point, a board moves back and forth, hinged in the tip. The plank is pulled with ropes on either side. Simple valves consisting of a wooden valve on either side let the air take in. If the air is compressed on one side, it is drained via a similar valve at the top to a round ventilation channel, one of which is mounted on each side. Netherlands wood (plant material). brass (alloy). iron (metal). rope

The meat grinder.

Half Model of a 15-Gun Gunboat with Sliding Keels.Polychromed mold model (starboard) of a three-master. The skin above the bark wood is closed, six gunpaints on one deck. Wrinkled mirror, hollow wulf, closed fence, no side gallery; Stir with square roaring. Side to both ends ascending, one bark wood. Flat bottom with three sliding colors. Scale approx. 1:36 (derived).

Model or A 24-pounder Breech-Loading Gun. Model of a back loading gun on a standard, loading stick, incomplete. The loop, long 47.5 cm, has a caliber of approx. 25 mm. The soul has a lead mantle, which is heavily corroded. The Kulas can be opened by a conical lock thread, which is running into the soul and is operated on the back with a lever. The loading stick indicates the use of point grenades, but any grooves in the soul can no longer be observed by corrosion. Some parts of the closing mechanism are missing. Scale 1: 6 (according to Obone).

Image of an M.F.-Sein (Dwarfsein) of the N.S. in Culemborg.n.b. The photo is part of a series of photos with technical installations of the signal system.

Metal detectors. The Ferex 4.021 magnetometer.

Subotica, Serbia, Yugoslavia - 1928: Konrath d.d. Presents SABA Radio. Broadcast Receiver, or past WW2 Tuner with 4 Tubes in Wooden case, and which requires external speakers. Built with SABA Low Loss Couplers, plug in coils for wave band change. Closely followed SABA construction proposal, as outlined in catalog Prohaska 1928, p.242.

Half Model of an 18-Gun Brig.Polychromed mold model (starboard) of a tweemaster. Ten gunposes on one deck. Wrinkled mirror, hollow wulf, no details of fence or side gallery; Stir straight with square roofing. Side in front and behind something ascending, one bark wood. Peaked round trip. Scale approx. 1:55 (derived).

Table clock 17th century Clockmaker: Daniel Picardi. Table clock 188490 Maker: Clockmaker: Daniel Picardi, Table clock, 17th century, Brass gilt, silver, glass, brass, steel, 6 1/2 3 1/2 in. (16.5 8.9 cm). The Metropolitan Museum of Art, New York. Bequest of Thomas Egleston, 1900 (00.12.2)

Labor Inspectorate Photo Collection. 5x5 coupling. undated

Concertina. Culture: British. Dimensions: W. across ends 15.9 cm (6 1/4 in.)point to point: 18.3 cm (7 1/4 in.)D. (closed) 10.8 cm (4 in.). Maker: Charles Wheatstone (1802-1875). Date: ca. 1862.A student model with colored buttons to facilitate the orientation of the fingers: the white buttons are for diatonic tones, red is C, the black buttons are the accidentals. Museum: Metropolitan Museum of Art, New York, USA.

Square Piano ca. 1790 Possibly German Practically the smallest, simplest piano imaginable, this instrument was carried wherever its quiet music was wanted. The rectangular case and layout of the keys, strings, and soundboard derive from the clavichord. Unlike a clavichords fixed tangents which contact the strings while they sound, the piano's hinged hammers bounce away, letting the strings vibrate freely. The hammer's lever adds velocity to the blow, allowing a louder sound than the clavichord tangent's gentle tap. The specific type of action found in this instrument is a primitive version of the German prellmechanik and each hammer strikes a single string. This tiny piano lacks dampers, so every tone overlaps the next as in a harp or hammer dulcimer. The instrument case is made of cherry wood. The piano has 54 keys (C-f3), with walnut or stained boxwood naturals and lighter wood accidentals.. Square Piano 503902

Travel camera by Eisenschiml & Wachtl, wooden construction, measuring 13 x 18 cm, produced between 1872 and 1897.

Old Plane Old plane on an isolated studio background Copyright: xZoonar.com/AndreyxSkatx 21790201

Platten folding camera "Bergheil" No. 517220 by Voigtländer & Sohn, 9 x 12 cm, metal body, Heliar lens f/13.5 cm with iris blends and Compur closure, produced 1923-1927.

Shoe buckles 1784-85 British. Shoe buckles 102506

The meat grinder.

Morse Key, c1900. This key was used by Marconi during his experiments on tuned circuits at the Haven Hotel, Poole in c 1900. It was the first type of key designed specifically for wireless work.

Model of a Winch for a Pile Driver, anonymous, c. 1800 - c. 1850 demonstration model Model of a winch with single transmission, copper Windas and friction brake. Netherlands (possibly) brass (alloy). copper (metal)

Secretary. Artist: Carlo Bugatti (Italian, Milan 1855-1940 Molsheim). Dimensions: H. 88, W. 39-1/2, D. 12-1/4 inches(223.5 x 100.3 x 31.1 cm.). Date: ca. 1895. Museum: Metropolitan Museum of Art, New York, USA.

Edison Amberola Phonograph, ca. 1913, Fort Myers, Florida, USA, North America

Fabry and Perot electrical equipment: detail. Photograph, 1899.

Model of an oscillating Steam Engine. Sketch model of the transmission of the movement of two oscillating cylinders on the shaft, mounted at an upright shelf. The shaft is moved with a crank on the back of the board, so that the pistons and two cross-cut cylinders will also move. Four legs behind the shelf make it possible to put the whole on its back.

Spreading camera by A. Stegemann, wooden body, 9 x 12 cm, produced around 1920.

Model of a Boiler for Steam Locomotives, anonymous, 1863 scale model Model of a tubular steam boiler, a variation on NG-MC-1162. Two fireplaces are separated by a room, causing pipes to connect the fireplaces. With a valve on the front, the air supply can be arranged from one fireplace. The combustion gases flow through the pipes to the space above the other fireplace, the bottom of which is closed to ensure that the air supply only goes through the valve of the first fire. The gases are then led via pipes to the chimney to be connected at the front. The remaining space in the model is for the boiler water. model maker: Franceafter design by: Paris copper (metal). tin (metal). lead (metal)

Model of A Ventilating Shaft and Portlight, Rijkswerf Vlissingen, 1849 demonstration model Model of an air and light cooker. Model of a part of a ship's wall, on a ground board. The ship's wall consists of the skin, two entry and the weighing; The space between the wooden is the air tube, with a grid. The air tube comes out in a deep conical porthole, which is completely covered with brass. The light of the Patrijspoort consists of a round glass with the convex, matte side to the outside and sunk into the skin. Scale 1: 4 (scale on model). Flushing wood (plant material). brass (alloy). glass

Half Model of a 32-Gun Frigate.Polychromed mold model (starboard) of a three-master. Sixteen guns divided over gun deck and semi-deck. Wrinkled mirror, hollow wulf, no details of fence or side gallery; Stir straight with square roofing. Scroll a little ascending, one mountain wood and one Reehout at both ends. Peaked round trip.

Plate folding camera by Ernemann-Werke AG, 9 x 12 cm, metal body, extra-rapid Aplanate lens f/135 mm, iris blends, Vario sectors closure, produced 1905-1926.

Portrait lens with Petzval system, No. 15899, with tooth drive, glass, brass frame, wooden lens standard, produced by Derogy Paris & London around 1890.

oil lamp, 85mm Chance Brothers & Co. La Mola lighthouse museum, Formentera, Pitiusas Islands, Balearic Community, Spain.

Model of a Wood Kiln, anonymous, c. 1750 - c. 1850 demonstration model Model of a wood stew or steam box for bending boards, on a ground board. It is a long box with a door on each end, reinforced with ribs all around the entire length and standing on two beams in the longitudinal direction. A round hole in the floor shelf on one side suggests that the model is incomplete: here originally stood the boiler. Netherlands wood (plant material). brass (alloy)

Half Model of a 20-Gun Sloop of War, anonymous, c. 1780 - c. 1820 ship model. half model. builder's model Mallen model (starboard) of a three -mast. Ten guns and a small gate on one deck. Get mirror, hollow wulf, no details of fence, side gallery or rudder. Seeping forwards and backwards, one bark wood and one reehout. Sharply peaked around. 'FM' in the inscription probably means French model. model maker: Netherlands (possibly)after design by: France wood (plant material)

Side view of the stem of the front end of Eckert and its relationship with age, vintage engraved illustration. Industrial encyclopedia E.-O. Lami - 1875.

Model of a 30-Pounder Gun on Deck, anonymous, c. 1828 demonstration model Model of a cannon of 30 pounds on Marshall-Dekuit on a ship's part with part of the ship's wall, incomplete. The wooden loop, long 22.5-23 cm, is not drilled; It has a flat grape with a brush ring. The Affuit consists of two parts. The front part is stuck with a pivot bolt in heavy brass brackets on the gate threshold; It is a heavy wooden block with a transverse roller underneath for baking and a heavy metal mik on top of which the loop lies in the saddle. The rear -off, becoming narrower from the front, consists of two cheeks with four stairs each, connected by a sloping calf, an axle shift behind and a bolt through both cheeks in the middle. The taps are fitted against the cheeks. The axle body is attached to the cheeks with brackets. The model has wooden wheels. The hoist is incomplete. A brush runs from the sides of the gate through the brush ring; A second breach is attached to the cheeks of the back -off a

Sewing machines with press foot. Close up. Soft drawer. Presser Foot Sewing Machines. Close up. Soft Focus.

door locks steel door locks on white door Copyright: xZoonar.com/VVxVoennyyx 5048948

Sedan Document Box, 17th century, 5 9/16 x 29 5/8 x 7 1/8in. (14.1 x 75.2 x 18.1cm), Huanghuali hardwood and pai-tong hardware, China, 17th century, Sedan boxes are so-called because their T-shaped design allows them to rest across the owner's knees on the carrying rails of the sedan chair while travelling. These boxes were used to bear documents, brushes, seals, money, and other valuables. The shape became synonymous with the scholar official and thus became a necessary accessory for any well-to-do gentleman.

Model or a water gauge. Model of a water level glass for steam boilers. The glass tube sits in a copper tube. On both ends a crane with a flange is arranged at odds; The bottom one was connected to the steam on the water and the top. At the bottom there is a third crane for cleaning and other purposes; The upper end is closed with a nut. All gaskets are from lead. The boiler water level was checked with this monitoring glass.

vintage manual coffee mill vintage manual coffee mill isolated on white background Copyright: xZoonar.com/ValeryxVoennyyx 5456623

Clutch cabinet.

Log. Mechanical log consisting of a gate log in a cupboard and two logs, one of which must be confirmed with a log line on the reverse side; The second Logvin serves as a reserve. The log prayers are cylindrical floats with three screw-shaped wings, which drives the gate log in the direction of the clock. The Round Kleglog has three enamel dials, for 1 mile (subdivided into sixteenden), 10 miles and 100 miles. Combined description

Model of a Pontoon Bridge, anonymous, 1821 demonstration model Model of a raft bridge with two pontoons, in which two different designs are shown. The bridge is opened by pulling the pontoons to each side under the rich layers. On one side the valve is lifted up by means of levers, on the other with chains and Cape Standers. Netherlands wood (plant material). brass (alloy). rope

Bronze and iron tripod cauldron decorated with animal and human figures, from the Tomb Barberini at Palestrina, Italy

Shiny silver metal mailbox with flag up.

Instrument. >>

Sweden, Blekinge, Blekinge, Karlskrona, Karlskrona, external marina (depicted, town).Sweden, Blekinge, Blekinge, Karlskrona, Karlskrona, External War Gogs (depicted, City)

Half Model of a Gunboat, anonymous, c. 1780 - c. 1820 ship model. half model. builder's model Polychromed mold model (starboard) of a single -master. The skin above the barkhout is closed, one gun gate in the bow. The deck is closed and detailed with the Betting, a chimney, the landing and two shutters. Around aft ship; Wide rudder with tie stick over deck. The Zeeg runs forward and back, one barkhout. Flat -bottom; The location of the sword on the bow is indicated. Scale approx. 1:22 (derived). Netherlands wood (plant material)

A cutting instrument for graft cuttings for fruit tree refinement, A graft cutting is a few centimeters long portion of a tail of a noble sort, a Edelauge is the bud. It is used in plant refining and site refining / Ein Schneidinstrument für Pfropfstecklinge zur Obstbaumveredelung, Ein Pfropfsteckling ist ein wenige Zentimeter langer Teil eines Edelreises, ein Edelauge ist die Knospe. Es wird in der Pflanzenveredelung und Standortveredelung verwendet, historical, digital improved reproduction of an original from the 19th century / digitale Reproduktion einer Originalvorlage aus dem 19. Jahrhundert, Originaldatum nicht bekannt, Kolorierung, koloriert, handkoloriert, Hand-colouring, hand coloured, colored.

Four-piece bronze mold for top of pot, mold casting tool tools kit metal-bronze bronze, cast Four-piece bronze mold for casting the top of pot top, Rotterdam tin foundry tin stain tin Meeuws Druy craft Shapes are from from the originally 18th century Rotterdam tinnegieter J Druy. The large molds that were not signed or dated were the property of the tinker guild and were rented to the small tin caster.

Dashboard. >>

Volksempfaenger VE 301 W, radio receiver from the Nazi era, built in 1933, Radio Museum Duisburg, North Rhine-Westphalia, Germany, Europe

Compass at the helm of a junk, Phang Nga Bay, Phuket, Thailand, Southeast Asia, Asia

Tower Clock Museum Granheim near Ehingen, Baden-Wuerttemberg, Germany, Europe

BODEGON CAMARA CONTAX.

Silversmith's Art, 20th century. Josef Hoffmann (1870-1956), Silver, coral and wooden tea-service, Art Nouveau style, 1904.

United States of America, 20th century - Sonora bakelite radio, 1940's.

A twin stereoscopic camera produced by Usines Gallus around 1925, metal body, 6 x 13 cm plate format for dual photography.

Trophy made & presented by Mr. G. Pearch to the batsman to secure his first 50 runs in an innings in The fastest time in The series of test cricket between Eng v Aust 1932-3. December 05, 1932.

Fluting Iron. Dated: 1936. Dimensions: overall: 28 x 35.6 cm (11 x 14 in.). Medium: watercolor and graphite on paperboard. Museum: National Gallery of Art, Washington DC. Author: J. Howard Iams.

old kitchen grater isolated

Close-up of chrome hair-dryer

Machineupb.Thermometers Man.-room BB.Kockums AB (depicted name), shark (depicted name)

of 2