Industrial Engineering Equipment

Photos showcasing advanced machinery and equipment in construction and engineering settings, featuring large cylinders and assembly processes.

Gas kettle in a heating power plant The coal-fired power plant supplies many households and companies with district heating by giving power and power and produces electricity for the base load. Overall, it has an electrical output of 273 megawatts and a thermal output of 680 megawatts. Block 4 was built in 1994 and uses natural gas as a fuel. It has a net output of 99 MW and is designed for the power tip loads. , Property Released

large hadron collider detecter

Space Launch System Corestage-2 Liquid Hydrogen(LH2) tank is under construction at NASA's Michoud Assembly Facility. Here you can see 1 of 5 barrels being loaded in the Vertical Assembly Center tool where it will be welded.

Gas kettle in a heating power plant The coal-fired power plant supplies many households and companies with district heating by giving power and power and produces electricity for the base load. Overall, it has an electrical output of 273 megawatts and a thermal output of 680 megawatts. Block 4 was built in 1994 and uses natural gas as a fuel. It has a net output of 99 MW and is designed for the power tip loads. , Property Released

CAPE CANAVERAL, Fla. - At NASA's Kennedy Space Center in Florida, technicians use a Hyster forklift to close in on one of the three main engines on space shuttle Discovery to remove it. Engine removal is part of the post-landing processing. Discovery completed the STS-119 mission March 28 with a landing at Kennedy's Shuttle Landing Facility. Each engine is 14 feet long, weighs about 6,700 pounds, and is 7.5 feet in diameter at the end of the nozzle. Discovery next will be used on the STS-128 mission to deliver supplies and equipment to the International Space Station. The launch is targeted for Aug. 6.

CAPE CANAVERAL, Fla. - In the Horizontal Integration Facility at Launch Complex 37 on Cape Canaveral Air Force Station in Florida, a worker monitors the progress of the operation to mate the second stage of a Delta IV rocket, at left, to the first stage.This United Launch Alliance Delta IV rocket is slated to launch GOES-P, the latest Geostationary Operational Environmental Satellite developed by NASA for the National Oceanic and Atmospheric Administration, or NOAA. Launch is targeted for Feb. 25.

STS-335 STS-135 ATLANTIS ENGINE #1 INSTALLATION

DN-SC-86-03394. Base: San Pedro State: California (CA) Country: United States Of America (USA)

Interior View of Orbiter Processing Facility 3

T&R Atlantis Engine 3 Removal

CAPE CANAVERAL, Fla. --- Inside the Vehicle Assembly Building at NASA's Kennedy Space Center, the external tank for space shuttle Discovery is lowered into a checkout cell for processing. The tank will be stacked with solid rocket boosters for Discovery's launch on the STS-124 mission. On the mission, the shuttle will transport the Kibo Japanese Experiment Module - Pressurized Module and the Japanese Remote Manipulator System. Launch is targeted for May 25.

CAPE CANAVERAL, Fla. - Technicians carefully remove main engine No. 3 from space shuttle Discovery using a specially designed engine installer, called a Hyster forklift. The work is taking place in Orbiter Processing Facility-2 at NASA's Kennedy Space Center in Florida. The removal is part of Discovery's transition and retirement processing. Work performed on Discovery is expected to help rocket designers build next-generation spacecraft and prepare the shuttle for future public display.NASA/Jim Grossmann

Reportage in the National Oncology Particle Therapy Centre in Milan, Italy (The CNAO - Centro Nazionale di Adroterapia Oncologica). Particle therapy is a state-of-the-art technique used to treat cancer. It consists of using hadrons, protons (proton therapy) and cabon ions (carbon-ion treatment) to irradiate tumours. It has two therapeutic purposes, a high ballistic accuracy which allows healthy tissue surrounding the tumour to be spared, and a greater efficiency at treating certain cancers. The CNAO is the only centre to own carbon-ion treatment technology in Europe. The synchrotron.

A refanned Pratt and Whitney JT-8D-109 turbofan engine installed in Cell 4 of the Propulsion Systems Laboratory at the National Aeronautics and Space Administration

CAPE CANAVERAL, Fla. -- In Orbiter Processing Facility-2 at NASAs Kennedy Space Center in Florida, technicians used a Hyster forklift to remove Engine #3 from space shuttle Atlantis. The engine will be transported to the Engine Shop for possible future use. Each of the three space shuttle main engines is 14 feet long and weighs 7,800 pounds. Removal of the space shuttle main engines is part of the Transition and Retirement work that is being performed in order to prepare Atlantis for eventual display at the Kennedy Space Center Visitor Complex in Florida.

Engineers at the Baikonur Cosmodrome prepare to mate the Soyuz TMA-4 capsule with its booster rocket in preparation for a launch on April 19 of the Expedition 9 crew and a European astronaut to the International Space Station, Friday, April 16, 2004 in Baikonur, Kazakhstan.

Manufacturing a hydropower turbine for Volk AG, Gutach, Baden-Wuerttemberg, Germany, Europe

KENNEDY SPACE CENTER, FLA. - In the Orbiter Processing Facility, Atlantis is seen after its nose cap was removed for routine inspection. The nose cap is made of reinforced carbon-carbon (RCC), which has an operating range of minus 250° F to about 3,000° F.

New renovated NASA Ames Research Center 12ft Pressure Wind Tunnel view of control room benchboard operations

Jet engine being set up for testing

KARLSRUHE, GERMANY - JUNE 28, 2024: KATRIN neutrino experiment at the KIT in Karlsruhe. KATRIN is a German acronym - Karlsruhe Tritium Neutrino Experiment - for an undertaking to measure the mass of the electron antineutrino with sub-eV precision *** KARLSRUHE, DEUTSCHLAND 28. JUNI 2024 KATRIN-Neutrinoexperiment am KIT in Karlsruhe KATRIN ist die Abkürzung für das Karlsruher Tritium-Neutrino-Experiment, mit dem die Masse des Elektron-Antineutrinos mit einer Genauigkeit von unter eV gemessen werden soll Copyright: xx

CAPE CANAVERAL, Fla. - In Orbiter Processing Bay 2 at NASA's Kennedy Space Center in Florida, technicians using a Hyster forklift prepare to remove main engine no. 2 on space shuttle Endeavour. Engine removal is part of the post-landing processing. Endeavour returned from the STS-127 mission July 31. Endeavour's next mission is STS-130 targeted for February 2010. Endeavour will deliver to the International Space Station the Tranquility pressurized module that will provide room for many of the station's life support systems.

Workers prepare transuranic nuclear waste from America's nuclear weapons program for long-term storage at the Waste Isolation Pilot Plant; the materials are stored in rooms carved out of an ancient salt formation a half mile below the Chihuahuan Desert, Carlsbad, New Mexico, USA, North America

KENNEDY SPACE CENTER, FLA. - In the Space Station Processing Facility, technicians with The Boeing Company move an infrared camera into position near the Japanese Experiment Module (JEM) for pre-assembly measurements. Developed by the Japan Aerospace Exploration Agency (JAXA), the JEM will enhance the unique research capabilities of the orbiting complex by providing an additional environment for astronauts to conduct science experiments.

STS-335 STS-135 ATLANTIS ENGINE-3 (LAST) INSTALLATION

NASA engineers install test hardware for the agency's new heavy lift rocket, the Space Launch System, into a newly constructed 50-foot structural test stand at NASA's Marshall Space Flight Center. In the stand, hydraulic cylinders will be electronically controlled to push, pull, twist and bend the test article with millions of pounds of force. Engineers will record and analyze over 3,000 channels of data for each test case to verify the capabilities of the engine section and validate that the design and analysis models accurately predict the amount of loads the core stage can withstand during launch and ascent. The engine section, recently delivered via NASA's barge Pegasus from NASA's Michoud Assembly Facility, is the first of four core stage structural test articles scheduled to be delivered to Marshall for testing. The engine section, located at the bottom of SLS's massive core stage, will house the rocket's four RS-25 engines and be an attachment point for the two solid rocket boos

Assembly laboratory in blue light. German Aerospace Centre (DLR), Bremen, Germany. Architect: Kister Scheithauer Gross, 2012.

. These images and videos show technicians at NASAs Michoud Assembly Facility in New Orleans lifting and installing the liquid oxygen dome weld confidence article for a future upper stage for NASAs SLS (Space Launch System) rocket onto the LTAC (LOX Tank Assembly Center) in Building 115 at Michoud for the next phase of manufacturing in July 2023. The dome makes up a portion of the liquid oxygen tank weld confidence article for the EUS (exploration upper stage). Teams use weld confidence articles to verify welding procedures and structural integrity of the welds to manufacture structural test and flight versions of the hardware. EUS flight hardware is in early production at Michoud. The more powerful upper stage and its four RL10 engines will be used on the second configuration of the SLS rocket, known as Block 1B, and will provide in-space propulsion to send astronauts in NASAs Orion spacecraft and heavy cargo on a precise trajectory to the Moon. NASA and Boeing, the lead contractor fo

STS-133 DISCOBVERY ENGINE-3 REMOVAL IN OPF-3 AND XFERRED TO ENGINE SHOP

Solar Array Concentrator in Vacuum Tank 6

Interior View of Orbiter Processing Facility 3

First weld of Orion Exploration Mission 1 crew module

The last of 15 RS-25 rocket engines arrived at Stennis Space Center from Kennedy Space Center in Flordia , on April 10, 2012. The engines will be stored at Stennis until testing begins for the engines to be used on NASA's new Space Launch System.

N-206 NASA Ames Research Center 12ft Pressure Wind Tunnel ADTE (Aeronautics Design & Test Environment) - test section

CAPE CANAVERAL, Fla. - Crews in Orbiter Processing Facility-2 at NASA's Kennedy Space Center in Florida remove space shuttle Discovery's right-hand inner heat shield from engine No. 1. The removal is part of Discovery's transition and retirement processing. Work performed on Discovery is expected to help rocket designers build next-generation spacecraft and prepare the shuttle for future public display.

CAPE CANAVERAL, Fla. - Using the Hyster forklift, workers move space shuttle main engine No. 3 during installation in space shuttle Discovery in Orbiter Processing Facility bay 3 at NASA's Kennedy Space Center in Florida. Each engine is 14 feet long, weighs about 6,700 pounds, and is 7.5 feet in diameter at the end of the nozzle. Discovery is being processed for its next mission, STS-119, targeted for launch on Feb. 12, 2009. Discovery and its crew will deliver integrated truss structure 6 (S6) and solar arrays to the International Space Station.

CAPE CANAVERAL, Fla. - Inside Orbiter Processing Facility-1 at NASAs Kennedy Space Center in Florida, three excessed fuel cells are on a work bench beneath space shuttle Atlantis. The left orbital maneuvering system, or OMS, pod has been installed onto Atlantis. The OMS provided the shuttle with thrust for orbit insertion, rendezvous and deorbit, and could provide up to 1,000 pounds of propellant to the aft reaction control system.The OMS is housed in two independent pods located on each side of the shuttles aft fuselage. Each pod contains one OMS engine and the hardware needed to pressurize, store and distribute the propellants to perform the velocity maneuvers. Atlantis OMS pods were removed and sent to White Sands Test Facility in New Mexico to be cleaned of residual toxic propellant. The work is part of the Space Shuttle Programs transition and retirement processing of the space shuttle fleet. A groundbreaking was held Jan. 18 for Atlantis future home, a 65,000-square-foot e

Manual worker in factory

Photograph shows the International Space Station Laboratory Module under fabrication at Marshall Space Flight Center (MSFC), Building 4708 West High Bay. Although management of the U.S. elements for the Station were consolidated in 1994, module and node development continued at MSFC by Boeing Company, the prime contractor for the Space Station.

Inside the Vehicle Assembly Building at NASAs Kennedy Space Center in Florida, Jacobs TOSC workers assist as a cover, called the spider, is moved closer to be attached to the top of the Space Launch System (SLS) Core Stage pathfinder on Oct. 4, 2019. With the spider secured in place, a crane will be attached to it to lift the pathfinder into the vertical position. The 212-foot-long core stage pathfinder arrived on NASA's Pegasus Barge at Kennedys Launch Complex 39 turn basin wharf on Sept. 27, 2019. The Pegasus Barge made its first delivery to Kennedy in support of the agency's Artemis missions. The upgraded 310-foot-long barge arrived, ferrying the SLS core stage pathfinder, a full-scale mock-up of the rocket's core stage. It will be used by Exploration Ground Systems and its contractor, Jacobs, to practice offloading, moving and stacking maneuvers, using important ground support equipment to train employees and certify all the equipment works properly. The pathfinder will stay at K

KENNEDY SPACE CENTER, FLA. - In high bay 3 of the Vehicle Assembly Building, the orbiter Atlantis has been lowered onto the mobile launcher platform below for mating with the external tank and solid rocket boosters already in place. After the stacking, Atlantis will undergo a shuttle interface test and other prelaunch processing. Atlantis' launch window begins Aug. 28. During its 11-day mission to the International Space Station, the STS-115 crew of six astronauts will continue construction of the station and install their cargo, the Port 3/4 truss segment with its two large solar arrays.

CAPE CANAVERAL, Fla. - The second stage of a Delta IV is lifted from its transporter in the Horizontal Integration Facility at Launch Complex 37 on Cape Canaveral Air Force Station in Florida.This United Launch Alliance Delta IV rocket is the vehicle slated to launch GOES-P, the latest Geostationary Operational Environmental Satellite developed by NASA for the National Oceanic and Atmospheric Administration, or NOAA. Processing of the Delta IV is on track for launch, targeted for March 4, 2010.

Launch Vehicle Stage Adapter (LVSA) Aft Cone Post Weld #7

X-59 Low Boom Flight Demonstrator, LBFD Probe Calibration Test

U.S. Air Force Airman 1st Class Holden Trovillion, 28th Maintenance Squadron test cell technician, performs a leak check after running a GE F101-102A jet engine at Ellsworth Air Force Base, South Dakota, Aug. 17, 2022. A leak check is conducted before the engine is moved into higher power settings during the augmenter functional check, or at the start of a new test.

KENNEDY SPACE CENTER, FLA. - In the Orbiter Processing Facility, workers raise the liquid oxygen feedline for the 17-inch disconnect toward orbiter Discovery for installation. The 17-inch liquid oxygen and liquid hydrogen disconnects provide the propellant feed interface from the external tank to the orbiter main propulsion system and the three Shuttle main engines.

The Boeing CST-100 Starliner spacecraft is lifted at the Vertical Integration Facility at Space Launch Complex-41 at Floridas Cape Canaveral Space Force Station on May 4, 2022. Starliner will be secured atop a United Launch Alliance Atlas V rocket for Boeings second Orbital Flight Test (OFT-2) to the International Space Station for NASAs Commercial Crew Program. The spacecraft rolled out from Boeings Commercial Crew and Cargo Processing Facility at NASAs Kennedy Space Center earlier in the day.

Power generators with water. Using a tidal power generation. Larger machines.

YOKOSUKA, Japan (Nov. 7, 2017) Sumitomo Industries workers align a new propeller for installation on the U.S. 7th Fleet flagship USS Blue Ridge (LCC 19). Blue Ridge is in an extensive maintenance period in order to modernize the ship to continue to serve as a robust communications platform in the U.S. 7th Fleet area of operations.

COMBINED ENVIRONMENTAL EFFECTS FACILITY

Plasma welding jig

N-238 60MW Aerodynamic Heating Facility outside of test section with Jean Brian (Arc heater, high pressure water manifold, & water cooled 8' conical nozzle)

Wind power. Modular system for bearings in wind turbine gears. Deutsches Technikmuseum. Berlin. Germany. Europe.

Interior View of Orbiter Processing Facility 3

The core stage liquid hydrogen tank for the Artemis III mission completed proof testing, and technicians returned it to the main factory building at NASAs Michoud Assembly Facility in New Orleans where it will undergo more outfitting. As part of proof testing, technicians apply a simple soap solution and check for leaks by observing any bubble formation on the welds. The technician removed the bubble solution with distilled water and then dried the area of application to prevent corrosion. To build the Space Launch System (SLS) rockets 130-foot core stage liquid hydrogen tank, engineers use robotic tools to weld five-barrel segments. This process results in a tank with around 1,900 feet, or more than six football fields, of welds that must be tested by hand. After the leak tests, the core stage lead, Boeing, pressurized the SLS tank to further ensure there were no leaks. After it passed proof testing, technicians moved the Artemis III liquid hydrogen tank to Michouds main factory.

Electric Propulsion Laboratory (EPL) Vacuum Facilities

Turbine and generator in a coal -fired power plant The power plant has five blocks, all of which still exist, but only block 5 is regularly operated. The block 5 operated with hard coal with an electrical output of 510 megawatts is in regular operation. The Block 4 operated with natural gas can only be used by the Federal Network Agency and the network operator to secure network stability. , Property released copyright: xzoonar.com/wolfgangxcezannex 21643820, model released, symbolic photo, property released

051026-0-0000B-002. Base: Pascagoula State: Mississippi (MS) Country: United States Of America (USA)

CAPE CANAVERAL, Fla. - In high bay 3 of the Vehicle Assembly Building at NASA's Kennedy Space Center, a crane lowers space shuttle Discovery toward the external tank and solid rocket boosters already stacked on the mobile launcher platform. The stacking and mating are in preparation for the launch on the upcoming STS-124 mission to the International Space Station. On the mission, the STS-124 crew will transport the Japanese Experiment Module - Pressurized Module and the Japanese Remote Manipulator System to the space station. Launch of Discovery is targeted for May 31

Launch Vehicle Stage Adapter Aft Cone Weld #1

France, biomass boiler room supplied with wood waste for district heating in Nantes.

Foundry coiling hot brass rod.

NASA engineers install test hardware for the agency's new heavy lift rocket, the Space Launch System, into a newly constructed 50-foot structural test stand at NASA's Marshall Space Flight Center. In the stand, hydraulic cylinders will be electronically controlled to push, pull, twist and bend the test article with millions of pounds of force. Engineers will record and analyze over 3,000 channels of data for each test case to verify the capabilities of the engine section and validate that the design and analysis models accurately predict the amount of loads the core stage can withstand during launch and ascent. The engine section, recently delivered via NASA's barge Pegasus from NASA's Michoud Assembly Facility, is the first of four core stage structural test articles scheduled to be delivered to Marshall for testing. The engine section, located at the bottom of SLS's massive core stage, will house the rocket's four RS-25 engines and be an attachment point for the two solid rocket boos

CAPE CANAVERAL, Fla. --Inside Orbiter Processing Facility-2 at NASAs Kennedy Space Center in Florida, technicians help secure a sling around space shuttle Atlantis right orbital maneuvering system (OMS) pod. The work is part of the Space Shuttle Programs transition and retirement processing of shuttle Atlantis. The OMS pod will be removed and sent to White Sands Space Harbor in New Mexico where it will undergo a complete deservicing and cleaning and then be returned to Kennedy for reinstallation on Atlantis. Atlantis is being prepared for display at the Kennedy Space Center Visitor Complex.

DF-SC-85-03365. Base: Kirkland Air Force Base State: New Mexico (NM) Country: United States Of America (USA)

Tarapur Atomic Power Station Unit 3&4 General view of fuelling machine under commissioning during construction of power station at Tarapur ; Bombay Mumbai ; Maharashtra; India

Inspection of an overhauled engine, Lufthansa, Frankfurt engine workshop

Engineers lift the Orion Crew Module Adapter Structural Test Article into the test stand at NASA Glenn Research Center Plum Brook Facility on Sept. 23, 2015. Part of Batch image transfer from Flickr.

The generator for a Base Expeditionary Airfield Resources (BEAR) power unit sits inside a newly designed test facility at Hill Air Force Base, Utah, April 26, 2022. The 526th EMXS activated a new maintenance workload on BEAR units after successfully testing the unit's first repaired asset. BEAR power units are used to power U.S. Air Force forward operating bases.

A860792 U12N MIDDLE NOTE FAC DELIVERY STALLER (Project Engineer) MAR 12 86 EG&G/NTS PHOTO LAB Publication Date: 3/12/1986 EDGERTON, GERMESHAUSEN & GRIER; EG&G; EQUIPMENT & INSTRUMENTS; FAC DELIVERY; FAC LOADING; FLAT CAR; HANGARS; HEAVY EQUIPMENT; MALE; MEN (ADD MALE MODIFIER); MIDDLE NOTE; MIDDLE NOTE NUCLEAR TEST; MIDDLE NOTE TEST; NEVADA; NEVADA TEST SITE; NTS; NUCLEAR ENERGY TECHNOLOGY; NUCLEAR TESTING; NUCLEAR TESTS; STALLER, GEORGE; TEST SITES; TUNNELS; U12N; U12N MIDDLE NOTE; UNDERGROUND; WEAPONS RELATED historical images. 1972 - 2012. Department of Energy. National Nuclear Security Administration. Photographs Related to Nuclear Weapons Testing at the Nevada Test Site.

First weld of Orion Exploration Mission 1 crew module

power electricity generators Electric power plant A large machinery sector to produce energy.

Engine room on a cargo boat ship

CAPE CANAVERAL, Fla. --- In Orbiter Processing Facility Bay 3 at NASA's Kennedy Space Center, space shuttle Discovery's payload bay door at right is nearly closed. Below the door is the shuttle's robotic arm. Discovery is the designated vehicle on the STS-124 mission to the International Space Station. On the mission, the shuttle will transport the Kibo Japanese Experiment Module - Pressurized Module and the Japanese Remote Manipulator System. The payload will be installed at the launch pad. Launch is targeted for May 25.

The JEM Experiment Logistics Module Pressurized Section is lifted from its shipping crate in the Space Station Processing Facility. The module will be moved to a scale for weight and center-of-gravity measurements and then to a work stand. The logistics module is one of the components of the Japanese Experiment Module or JEM, also known as Kibo, which means "hope" in Japanese. Kibo comprises six components: two research facilities -- the Pressurized Module and Exposed Facility; a Logistics Module attached to each of them; a Remote Manipulator System; and an Inter-Orbit Communication System unit. Kibo also has a scientific airlock through which experiments are transferred and exposed to the external environment of space. Kibo is Japan's first human space facility and its primary contribution to the station. Kibo will enhance the unique research capabilities of the orbiting complex by providing an additional environment in which astronauts can conduct science experiments. The various com

Boeing Subsonic Ultra Green Aircraft Research (SUGAR) Subsonic Fixed Wing in the (TDT) 16 Foot Transonic Dynamics Tunnel facility 648

transformer mailing, factory, india Copyright: xHarixMahidhar/DinodiaxPhotox

Aircraft Mechanic Assembling 1/6-Segment Of The Pressure Bulkhead

ARES HARDWARE MOVE IN BUILDING 4755 OF A Y-RING INTO THE ROBOTIC WELD TOOL & THE COMMON BULKHEAD DOME MANUFACTURING DEMONSTRATION ARTICLE ONTO THE WOODEN TOOLING STANDS ON FEBRUARY 19, 2010

KENNEDY SPACE CENTER, FLA. -- In Orbiter Processing Facility bay 2, workers secure the overhead lifting device that will lift the orbiter boom sensor system for installation in Endeavour. Endeavour is scheduled to fly on mission STS-118 to the International Space Station in the summer of 2007. It will deliver the third starboard truss segment, S5.

VANDENBERG AIR FORCE BASE, Calif. - The launch gantry is rolled back to reveal the United Launch Alliance Delta II rocket with the Soil Moisture Active Passive, or SMAP, satellite aboard, at the Space Launch Complex 2 at Vandenberg Air Force Base, California. SMAP is a remote sensing mission designed to measure and map the Earth's soil moisture distribution and freeze/thaw stat with unprecedented accuracy, resolution and coverage.SMAP will provide global measurements of soil moisture and its freeze/thaw state. These measurements will be used to enhance understanding of processes that link the water, energy and carbon cycles, and to extend the capabilities of weather and climate prediction models. SMAP data also will be used to quantify net carbon flux in boreal landscapes and to develop improved flood prediction and drought monitoring capabilities. Launch is scheduled for Jan. 29, 2015.

GENERAL AVIATION PROGRAM WILLIAMS INTERNATIONAL FJX-2 ENGINE

Vacuum Facility 5

Side view of young male mechanic examining car at garage

CAPE CANAVERAL, Fla. - Technicians carefully remove main engine No. 3 from space shuttle Discovery using a specially designed engine installer, called a Hyster forklift. The work is taking place in Orbiter Processing Facility-2 at NASA's Kennedy Space Center in Florida. The removal is part of Discovery's transition and retirement processing. Work performed on Discovery is expected to help rocket designers build next-generation spacecraft and prepare the shuttle for future public display.NASA/Jim Grossmann

Worker working on an electrical power plant, gas turbine generator and drive shaft, Prudhoe Bay, Arctic Alaska, USA, Summer

A89455 U12P DISKO ELM FRONT-END EXP. MAIN BLOCK SCHWARZ (Project Engineer) MAY 4 89 EG&G/NTS PHOTO LAB Publication Date: 5/4/1989 BLOCKS; DISKO ELM; DISKO ELM TEST; EDGERTON, GERMESHAUSEN & GRIER; EG&G; EQUIPMENT; EQUIPMENT & INSTRUMENTS; EQUIPMENT (SNL); FRONT-END EXP. MAIN BLOCK; FRONT-END EXPERIMENT; INSTRUMENTS & EQUIPMENT; MAIN BLOCK; NEVADA; NEVADA TEST SITE; NTS; NUCLEAR ENERGY TECHNOLOGY; NUCLEAR TESTING; NUCLEAR TESTS; P-TUNNEL; TEST SITES; TUNNELS; UGT; UNDERGROUND; UNDERGROUND TESTING; DISKO ELM-FRONT END EXPERIMENT historical images. 1972 - 2012. Department of Energy. National Nuclear Security Administration. Photographs Related to Nuclear Weapons Testing at the Nevada Test Site.

Workmen constructing industrial pipes

Druckkessel in einem Gaskraftwerk *** Pressure boilers in a Gas power plant 1074706731

Forward Skirt for Artemis IVs Core Stage Moves to Next Phase of Production. Crews at NASAs Michoud Assembly Facility in New Orleans lift the forward skirt of a core stage that will power NASAs Space Launch System (SLS) rocket out of the Vertical Weld Center Sept. 16, 2022.The forward skirt will be used for NASAs Artemis IV mission. The hardware houses flight computers, cameras, and avionics systems for the SLS rocket.The SLS core stage is made up of five unique elements: the forward skirt, liquid oxygen tank, intertank, liquid hydrogen tank, and the engine section. When fully stacked, the forward skirt is located at the top of the 212-foot-tall core stage and connects to the upper part of the rocket. The core stage and its four RS-25 engines provide more than 2 million pounds of thrust to help power NASAs next-generation lunar missions.Image credit: NASA/Michael DeMocker

T&R Endeavour Airlock Removal

KENNEDY SPACE CENTER, FLA. - In the Space Shuttle Main Engine (SSME) Processing Facility, Boeing-Rocketdyne technicians lower SSME 2058, the first SSME fully assembled at KSC, onto an engine stand. The engine is being moved from its vertical work stand into a horizontal position in preparation for shipment to NASAs Stennis Space Center in Mississippi to undergo a hot fire acceptance test. It is the first of five engines to be fully assembled on site to reach the desired number of 15 engines ready for launch at any given time in the Space Shuttle program. A Space Shuttle has three reusable main engines. Each is 14 feet long, weighs about 7,800 pounds, is seven-and-a-half feet in diameter at the end of its nozzle, and generates almost 400,000 pounds of thrust. Historically, SSMEs were assembled in Canoga Park, Calif., with post-flight inspections performed at KSC. Both functions were consolidated in February 2002. The Rocketdyne Propulsion and Power division of The Boeing Co. manufactu

Ares 1-X segment ballast fit check

Machinery in power plant

KENNEDY SPACE CENTER, FLA. - In the Orbiter Processing Facility, the aft of Discovery is shown with all three Space Shuttle Main Engines (SSMEs) installed. Discovery is designated as the Return to Flight vehicle for mission STS-114. Recent improvements to the SSME include the introduction of redesigned high-pressure turbopumps into the SSME fleet. The new pumps are designed and built by Pratt and Whitney at West Palm Beach, Fla. SSMEs and the Pratt and Whitney turbopumps are tested at Stennis Space Center in Mississippi. Engines and engine components are delivered to Kennedy Space Center to be prepared for flight.

Senior engineer looking at equipment in ship's engine room.

Technicians Lift, Prepare Artemis III SLS Intertank for Next Phase of Production at NASA Michoud. Technicians at NASAs Michoud Assembly Facility in New Orleans lift the intertank of the SLS (Space Launch System)s core stage for NASAs Artemis III mission to move it to another location in the 43-acre factory for further inspection and production. The intertank is the backbone of the rockets core stage and is located between the mega rockets liquid hydrogen tank and liquid oxygen tank. In addition to joining the rockets two massive propellant tanks, the intertank houses avionics and electronics and serves as an attachment point for the rockets two solid rocket boosters positioned on either side of the core stage. The liquid hydrogen tank and liquid oxygen tank hold 733,000 gallons of super-cold propellant to power the stages four RS-25 engines needed for liftoff. Together, the rockets four RS-25 engines and two solid rocket boosters provide more than 8.8 million pounds to launch NASAs an

In one of the initial assembly steps for the Saturn IB launch vehicle's S-IB (first) stage, workers at the Michoud Assembly Facility (MAF) near New Orleans, Louisiana, position the thrust structure. Developed by the Marshall Space Flight Center and built by the Chrysler Corporation at Michoud Assembly Facility (MAF), the S-IB utilized eight H-1 engines and each produced 200,000 pounds of thrust, a combined thrust of 1,600,000 pounds.

Siemens Energy Innovation Campus

desalinizadora Son Tugores,centro de control de la estacion de tratamiento de agua potable, Palma, Mallorca, balearic islands, spain, europe.

SENIOR AIRMAN Scott Fowler (top) and SENIOR AIRMAN Paul Gallegos, maintenance personnel with the 321st Strategic Missile Wing, guide the re-entry system for LGM-30 Minuteman III missiles onto a missile guidance set. Base: Grand Forks Air Force Base State: North Dakota (ND) Country: United States Of America (USA)

of 3