Vintage Tools and Models

Historical models of vintage tools and machinery, including sewing machines and cameras, showcasing craftsmanship from earlier eras.

antique electric iron antique electric iron Copyright: xZoonar.com/BorisxZerwannx 7006200

Old sewing machine isolated on a white background

Wooden box camera for two-color photographic recordings, 85 x 100 mm, made around 1855 for early color photography.

Model or a winch. Sketch model of two capstanes with framework in a wooden frame that represents two decks. The capstanes have a smooth drum. With a stool and horizontal gears, the first capstan with a 16/1 ratio is driven. In the heel of the capstanes, gear wheels, which transmit the movement of the first capstan in a 1/4 ratio on the second. The first capstan also has holes for ten wind trees in the head; The second consists only of a drum.

Model of ship guns on AFFuit. Model of ship gun consisting of loop with chair and gun port with perched breeding.

Model or a pair or hydraulic forge bellows. Model of a hydraulic blower bellows on base plank. It consists of a vessel that is horizontally suspended in two forks and a lever a quarter circle around its axis can be rotated back and forth. The space inside is transformed into an endless circle through a tube in the axle direction, which is finished again by a shot placed in the longitudinal direction between the outside and inner wall at the top of the tube. On the one hand, an embedded valve with the sailing valve is arranged on either side of this shot, on the other side outgoing valves, on which a ventilation pipe is connected. If the vessel is now filled with water, the space that remains for air is shared in two compartments: by turning the barrel back and forth, alternately larger and smaller, because the water surface remains horizontal. The air flow is achieved. The ventilation pipe is bent so that the end runs with the rotation axis, and connects to a fixed pipe in a wall behin

antique electric iron antique electric iron Copyright: xZoonar.com/BorisxZerwannx 7006200

. Rescue device against a sloping wall. The device consists of a set of floats connected by a crossbar with a vertical round pole in the middle. It is kept against the wall with two conductors through the crossbar and is secured with a chain; The chain is loosened with a slip hook, which is operated with a rope through the wall, after which the device falls down along the guide bars and releases. A fire plate with luminous heat is applied on top of the pole. Just before launching the heat is lit with a flint slot that is applied to the wall in a brass protective cap, with a tractor rope that passes through the wall over a few discs. The lid of the fire plate, which protects against moisture, is attached to the wall and stays behind after launch. In the bottom end of the pole, an extendable iron rod with a round plate is applied, which extends as soon as the device is released. A fire plate is attached separately (NG-MC-1081-B).

A Coffee Grinder Isolated on White Background with clipping path

Model of a Life Buoy, anonymous, 1820 demonstration model Model of a rescue device against a sloping wall. The device consists of a set of floats connected by a crossbar with a vertical round post in the middle. It is held against the wall with two guidelines through the cross -blare and is guaranteed with a chain; The necklace is loosened with a slip hook, which is operated through the wall with a rope, after which the device falls down along the guidelines and is released. The pole of the device has a fire plate on top for luminous fire. Just before launching, the fire is lit with a flint lock that is applied to the wall in a brass protective cap, with a tractor rope that goes through the wall over a few discs. The lid of the fire plate, which protects it against moisture, is attached to the wall and is left behind after launch. In the bottom end of the post, an extendable iron rod with a round plate has been applied, which slides out as soon as the device is released. United Kingdom

Model of a Ballista. Working model of a slingshot. The body is a framework with two cheeks, on which a flash pad with pad is applied. The spoon separates with its lower end between two strands of rope. In lowered position, the spoon is secured with a pal, and the rope can then be tense by turning it around i.g.v. a hand spoke with a wheel-up with pawl against the cheeks; When the spoon is released, he waves up and the bump block is stopped in vertical position.

Model of a Capstan, anonymous, c. 1819 demonstration model Model of a capstan in a wooden frame of two levels. The Cape Storge is for eight wind trees and has six places in the heel against the decline. The metal king continues into a track on the lower deck. This Cape Storer has two speeds, which are obtained by letting or lifting the piles in the head and in the heel; The Raderwerk, consisting of sun-and-plan trailer, is placed under the upper deck between the beams of the fishing. model maker: Netherlands (possibly)after design by: United Kingdom wood (plant material). brass (alloy)

Model or steering gear. Splitting model of the port half of a stern over the water line that demonstrates the steering device. The stern has an elliptical fence and three decks, all indicated with their web; The upper deck is open. It has a large cross-shaped screw sleeve between stern and screw stages. Just before the screw sleeve, the drum of the steering wheel is on the upper deck. The steering device, which runs just below the upper deck, is a mixture of Rapson slide and luiverwagen. The lower stirring pin moved by the control device is curved to be able to move in the scope of the screw cooker; It is not directly connected to the stirring king, but revolves around your own axis and the movement is transferred to the steering station with two hinges. Between rails, which are arranged between the screw sleeve and the ship's wall, a plate goes back and forth with a bracket loosely around the stem, driven by the control strip that goes over two discs on top of this plate. Due to the p

Traditional music box isolated on white background. Traditional music box isolated on white

Close-up of an antique camera

Model of a Gun on a Slide and Pivot, anonymous, c. 1830 - c. 1840 demonstration model Model of a cannon on sliding and turning, on ground board, incomplete. The wooden cannon is 13.9 cm long, the soul is not uigeboord. The sliding feat, for narrower than behind, consists of two cheeks with four stairs, connected by a calf and the axle fives; The rear axle body is missing. The Affuit has no wheels, but slides over the shelves of the sledge with the Wnagen. The sledge is a wooden frame with crossbars at the ends and in the middle; It has roles at the bottom for the movement over the turning bircons. The outer turning circle is laid on a raised wooden circle; The increase in the middle for the pivot bolt is missing. Scale 1:20 (estimate). Netherlands (possibly) wood (plant material). brass (alloy)

Edison Bijou Phonograph. Maker: Thomas A. Edison, Inc.. Made in New York, USA.. Note on the top reads:. 'Drop a Penny in the slot turn crank gently till it stops'

Historic kitchen utensils, meat slicer, meat grinder, 1887, Germany, Historic, digitally restored reproduction of an original 19th century model, exact original date unknown, Europe

Model of a Capstan with a Winch, Rijkswerf Rotterdam, c. 1830 demonstration model Model of a capstan on a wooden floor. It is a pivot with a winch in the head and four piles in the heel against the decline. The head has decorated a loose wooden cover plate with a star and is attached to the brass shaft, which is placed in the reinforced floor with a square heel. The drum is equipped with a toothed wheel under the head, which is driven by two hodels with rads in the head; So the drum runs under the head. With two wedges on either side, the cracks can be disconnected. The drum has six clamps. Scale 1:10 (estimate). This model is almost identical to NG-MC-197. model maker: Rotterdamafter design by: United Kingdom wood (plant material). brass (alloy)

Old Wooden Radio Tuner Station

MAQUINA DE FOTOGRAFIA.

Model of a Carronade on a Slide, anonymous, 1785 - 1795 demonstration model Model of a carronade on a slide on a ground board representing a part of a ship deck. The carronade has a caliber of 21 (16.6) mm and is 29 cm long. The loop has a final exaltation with visor, a visor on the tap band and a front tire, a brush ring and an eleve screw through the grape; The Eleveers screw is covered with a rain cap. The upper slide has a light trape-shaped body with brass batter and rings, the front and back are completed. Against the back the baking tub in brass batter, on top of a brass plate to support the eleve screw and the ears on the front through which the tapas runs; The vertebral leg runs between the layers of the deducted. The submerged consists of a wooden frame with brass batter, which leads something to the front and completed in the front. Calves are applied in the middle and behind, including wheels attached; The rear wheels can swing. A baking tub has been applied to the back of

Apparatus for unknown type of light experiment. Probably your own construction. The disk similar technology for film projection. Older type of power cable, textile.

Chassis of Tin ink, c. 1850 - c. 1900 Tin chassis. There is a rectangular plate with a raised edge on four caps. A high pen case in the container in the left Achterhoek. In addition, almost against the rear wall on two circular layer, raised edges for the ink pot and the sandy pot. Netherlands tin (metal) casting Tin chassis. There is a rectangular plate with a raised edge on four caps. A high pen case in the container in the left Achterhoek. In addition, almost against the rear wall on two circular layer, raised edges for the ink pot and the sandy pot. Netherlands tin (metal) casting

Coffee grinder Coffee grinder isolated on the white background Copyright: xZoonar.com/OlgaxPopovax 1588490

Old rusty lantern against a white background

A rectilinear lens by F. Jarret with a 17 cm focal length and iris blends (divisions 8-64), mounted in a glass, brass, and wooden frame. Designed for controlled photographic imaging.

Wave-siren by Karl Rudolph Koenig (1832-1901) German businessman, instrument maker and physicist, primarily concerned with acoustic phenomena. Inventions of the nineteenth century. Old 19th century engraved illustration from El Mundo Ilustrado 1879

Edison gramophone on white background

alte box von vor 1936 alter fotoaparat von vor 1936 - einfache box für rollfilme Copyright: xZoonar.com/NorbertxKustermannx 4401057

Netsuke. Culture: Japan. Dimensions: H. (open) 2 5/16 in. (5.8 cm); H. (closed) 1 7/16 in. (3.7 cm)W. 1 5/16 in. (3.4 cm); D. 7/8 in. (2.3 cm). Date: 18th century. Museum: Metropolitan Museum of Art, New York, USA.

Model of A Lifting Screw, Royal Factory P. van Vlissingen & Dudok van Heel, 1853 demonstration model Model of a screw cooker between stern and stiral, with a part of the keel. The screw light device consists of a loose metal frame with a normal two -blade screw, which can be hoisted up and down in the tube on a rope, which runs over a disc at the top of the screw cooker and a disc in the screw window. For this, the propeller shaft must first be withdrawn. The screw window moves over vertical rails against the stern and the screw stitch that are equipped with teeth; This includes piles of the screw window that prevent the slip. The piles can be retained by pulling two ropes, so that the screw window can sink. Clamp rods against screw and stern can block the movement of the screw window. The joke that prevents the turning of the screw on lifting, is missing. Scale 1:10 (derived). Amsterdam wood (plant material). brass (alloy). iron (metal). rope Shimonoseki, Street of

Canopic box of Hatnefer. Dimensions: Box: H. ca. 53 cm (20 7/8 in.) ; W. 52 cm (20 1/2 in.); D. 51.5 cm (20 1/4 in.)Lid: H. of lid 2.5 cm (1 in.); W. 51 cm (20 1/16 in.); D. 51 cm (20 1/16 in.)Overall: H. 55 cm (21 5/8 in..); L. of sledge 79 cm (31 1/8 in.). Dynasty: Dynasty 18, early. Reign: reign of Thutmose II-Early Joint reign. Date: ca. 1492-1473 B.C..In 1936, the Museum's Egyptian Expedition discovered a rock-cut tomb on a hillside just below the offering chapel of Senenmut, one of Hatshepsut's best known officials. The tomb had been prepared for the burial of Senenmut's mother, Hatnefer, who had died in her 70s, early in the joint reign of Hatshepsut and Thutmose III. By this time, Senenmut had become an important official, and he could provide a comparatively rich burial for his mother, including this canopic box.The box and lid are made of cypress which has been covered with a layer of linen and gesso, and painted white. Inside the two leaves of an inner lid pivot open to

Close-up of a wooden folding chair

Mechanical tachograph bronze. Used to register train speeds. Basque Railway Museum (Euskotren). Basque Country. Spain.

Shifter and sorter. This device would be used to get similar-sized batches of cocoa beans to facilitate a uniform roasting. Dated 21st Century

Mill fox ideal.

Backgrounds and textures: two old carpenter’s planes on a wooden workbench. Two old carpenter’s planes

Public Telephone' still bank, early 20th century, 7 3/8 x 3 9/16 x 1 1/2 in. (18.73 x 9.05 x 3.81 cm), Tin, wood, string, pigment, United States, 20th century

Landscape Aplanat lens series B2 by Edmund Hartnack, 12.3 cm focal length, f/9 aperture, iris divisions from 14 to 80, glass elements, brass frame, wooden lens standard.

Light (USA); Designed by George Washington Maher (American, 1864-1926); Client: Ernest L. and Grace King; Overall: 13.2 x 15 x 9.2 cm (5 3/16 x 5 7/8 x 3 5/8 in.)

Brown wooden lumps with holding rods Brown wooden sighs with holding sticks

Barrel Organ ca. 1800 American Instead of having a keyboard played by an organist, a barrel organ is a mechanical instrument that has the musical notes encoded in an arrangement of metal pins in a wooden barrel or cylinder. This instrument is activated by a person turning a hand crank, which both powers the bellows that provides air, and also rotates the cylinder that engages the mechanism that sends the air through specific pipes. The tunes represent a typical repertoire of English and American dances, patriotic songs, hymn tunes and popular music of the period ca. 1800. Technical description: Rectangular cherry and satinwood veneered case with inlay showing a classical portal on the front panel; lid hinges up to reveal mechanism; door on left side allows barrel to slide out; several different layers of floral design colored paper cover interior case sides and reservoir top; lid locks to front, with keyhole above portal; four brass stop knobs (two missing) operate stop levers extendin

Sleigh Seat ca. 1800 American. Sleigh Seat 457

Megalethoscope; Carlo Ponti (Italian, born Switzerland, about 1823 - 1893); Italy; about 1862; Wood, metal fixtures, and glass; 59.1 x 91.4 x 47 cm (23 1,4 x 36 x 18 1,2 in.)

Safe Bank' still bank, c. 1920, 4 x 2 11/16 x 2 1/2 in. (10.16 x 6.83 x 6.35 cm), Tin, pigment, United States, 20th century

Tackle-Board and Sledge for Rope Making, anonymous, 1800 - 1860 tools A rope shop consisting of a turning gall for beating and tensioning the strands and a sledge for beating the rope. The turning gall is on a heavy ground board and has a needle for four strands; A large gear that drives three small gears in the corners is operated with a crank. The hooks to which the strands are attached are mounted on the axles of the gears and the needlework therefore ensures that the outer three run faster than the middle one, which also turns in the other direction. The sled has four wheels; The mechanism only has a hook, where the movement of the crank is transferred to a small gear through a large gear. Netherlands wood (plant material). brass (alloy). iron (metal)

Product photography d. Fa. Flats

Collection box. Oak cash box for the church service, to which a short handle of walnut and a sconce. A bust of Paul is sculpted in low relief in the standing shelf behind the scooper. On the front is: "Does God's Wille your caritate" replenge.

Model or a capstan. Model of a capstan in a wooden frame that represents two decks. The capstan has a double head, each for twelve wind trees, and has two catches in the heel against falling. The metal king continues to a trace on the lower deck. This capstan has two speeds that obtained through the use of one or the other head; The top head must be turned in the opposite direction to achieve the lower speed. The rollerwork with palls is placed in the heel of the capstan. Scale 1:10 (estimation).

2008.1304 - view 2. Happy in Beauty, Life and Love and Everything, 1896. Sir William Ernest Reynolds-Stephens

Brown coffee grinder isolated on white background

Brass and iron design fitting on antique wooden almira, Jodhpur, Rajasthan, India Copyright: xSafatxAli/DinodiaxPhotox

retro brass samovar - retro brass samovar isolated on white background

Astrolabe, Chapotot, Louis (1670-1700)

Elegant watch repaired using a magnifier with three handles

Alte Mikroskope von Filippo Bonanni, Louis Joblot, 17. und 18. Jahrhundert

Sand Glass Of 30 Seconds. The hourglass is mounted between wooden plates that are held together by brass bolts.

Vintage Photograph. Seth Thomas Metronome on paper background, Frame 1

classic wood stove, Estancia Santa Susan near outskirts of Buenos Aires, Argentina

44.127 504399

Wood metronome

The top care, black. The top care, blackbed

The dirk of the officer Soviet military - marine sea fleet

Antique iron

clockwork gears isolated on white background

Box with Compass Card. Wooden box with a compass rose belonging to azimutkas. The compass rose is printed on green paper; The degree distribution, in four quadrants, is in mirror magazine for reading with the prismatic visor. The compass rose has a metal border on which the degrees are divided into 20 '. Two compass roses can be stored in the wooden box under two metal terminals with the magnetic poles so addressed that the magnetic properties are optimally stored.

Controller relaxing fitted on a vertical heater, vintage engraved illustration. Industrial encyclopedia E.-O. Lami - 1875.

Light image, photography of phone from L.M. Ericsson & Co., Stockholm.

clockwork gears isolated on white background

Te Poel, Dark green painted miniature dustbin, with 1853, trash jug holder kitchenware miniature toy relaxant model wood paint, molded painted Inverted trapezoidal army green inside dark gray standing on four legs Loose lid and sides with handle. Year 1853 on front and back 1853 (painted front in nails at the back) 1868 Sibilla van Embden play store drains kitchen

Anefo photo collection. Assignments company Sieben in Amsterdam. December 30, 1958. Amsterdam, Noord-Holland

Button headline, 1860s.

isolated golden object made in 3d graphics

kitchen implement, Protein - beater, historical kitchen appliances, Betty Gleim's cookbook, 1847 / Eiweiß - Schlagmaschine, historische Küchengeräte, Betty Gleims Kochbuch, 1847, Historisch, historical, digital improved reproduction of an original from the 19th century / digitale Reproduktion einer Originalvorlage aus dem 19. Jahrhundert.

United States: 1947 The Majestic 7P420 seven tube portable radio.

Regal, Renaissance Musical Instruments

Beautiful old wooden radio on a over white background

Reproduction. >>

Vintage photograph. High angle view of gavel resting on wooden block

Clocks And Time Pieces - Folder 2/2 Time. June 27, 1955.

Vintage camera

hand drawn vintage coffee grinder. hand drawn vintage coffee grinder, vector eps 10

H Langden Brown and Milton Bevier, Apple Peeler, c 1940 Apple Peeler

Table clock tiled Joseph Rose & Son

And ripping through a purifier scrubber, vintage engraved illustration. Industrial encyclopedia E.-O. Lami - 1875.

Traditional wooden kalimba isolated on black background. Traditional wooden kalimba isolated on black

Church Chair. Dated: c. 1936. Dimensions: overall: 33.6 x 24.2 cm (13 1/4 x 9 1/2 in.) Original IAD Object: 36"high; 21"wide; 19 1/2"deep. Medium: watercolor, colored pencil and graphite on paper. Museum: National Gallery of Art, Washington DC. Author: Florence Huston.

Voltaic battery (pile): this was made up of a disc of zinc, a disc of copper, a disc of cloth moistened with acid, then a disc of zinc and so on. Each contact between zinc and copper formed a 'couple'. From A Ganot 'Natural Philosophy', London 1887. Engraving.

Philips portable radio, model LX434AB41, made of Bakelite, Radio Museum Duisburg, North Rhine-Westphalia, Germany, Europe

Model of A Gun and Carriage. Model of a cannon on tilt litter. The wooden loop, long 39.3 cm, is from the front loader mantle type with six mantels, and has a pairing ring. The soul, which is not grooved, has a 24 mm caliber. The oxfuit consists of two parts: the upper suit has two cheeks, the bottom of which is cut into a curve and has teeth provided, which run in tooth brakes on the cheeks of the subway. The upper suit can tilt on the bencher. The cannon lies with its taps in the rear corners of the cheeks of the upper suit, so that the piece is lifted up when the upper suit is tilted forward, and sinks when it is tilted backwards; The upper suit is provided for a counterbalance in front. A set of rods between the kulas and submerfuit holds the cannon in a horizontal position, and is connected to an elevator in the vertical vertess. A second set of rods on the cheeks of the upper suit is connected to sliding, moving in slots on the cheeks of the subwayfuit: it stabilize the upper sui

Universal mechanical sundial (without a Plumb-Bob and Compass). St. Petersburg. 1761-1762 or 1763. Invented and made by NiKolay Chizhov. Brass; engraving. The State Hermitage Museum. Saint Petersburg. Russia.

Single clock against white background

Old messenger camera

Vintage Photograph. View of hand carved Atmoscope Barometer

Vintage brown coffee mill Vintage coffee mill isolated on white background Copyright: xZoonar.com/AndreyxEreminx 6107178

Screwdriver brace second half 17th century possibly French. Screwdriver brace. possibly French. second half 17th century. Wood. Woodwork

2008.1304 - view 1. Happy in Beauty, Life and Love and Everything, 1896. Sir William Ernest Reynolds-Stephens

Lucida Mr. Laussedat, vintage engraved illustration. Industrial encyclopedia E.-O. Lami - 1875.

Pocket watch movement

Travel camera by Siegfried Wachtl in Vienna, wooden body, measuring 13 x 18 cm, created around 1900.

of 2